The Z Fuselages Continued
So here are some shots of the Z project all assembled. Most of the control linkages in the wings are sorted out. I will send the servo mounting plates. The wing is glassed and primed. So are all the wing control surfaces. The H stab is glassed the rudder and elevator are ready to cover. The chin cowls are glassed along with the fuses though they need to be primed and checked out. I planned to get the motors installed and then finish up the fit of the cowls by using body filler to make the seams disappear and fill the imperfections. The tailwheel linkages are stalled for pull pull and the tubes are in for the rudder pull pull and the elevator pushrods. You can see the gear in the picture. As you can see the wing fillets need to be added yet.
Shot of the fuse interiors
The gear
The whole works assembled
close up shots of parts of the plane
WING FUSELAGES 2nd Fuse Page 3rd Fuse Page TAIL INSTALLATIONS FINISHING